There is a huge amount of fasteners available not just screws and nuts and washers. There is equipment and rack hardware, chassis hardware, standoffs and spacers, various captive nuts, cable routing hardware, rivets (pop and cold), and a variety of brackets. All very useful for 'Garage Engineering' prototyping.
 |
Philips Head Screws... From 1/4" to 2" in length and sizes from #0-80 through 1/4"-24 and larger in both button-head (pan) and flat-head (countersink) styles. There is also available a supporting washer collection and various nuts of all types. All in a variety of alloys and plating (finishes). |
 |
Allen Head Screws... From 1/4" to over 8" in length and sizes from #2-56 and smaller to over an inch. Including socket, button (pan) and flat (countersink) styles. Many of these are solid stainless-steel and further heat-treated for extreme strength. There is also available a supporting washer collection and various nuts of all types. |
 |
Large Bolts... Hex head bolts of various sizes and grades as well as some large Allen-Head bolts. This is a small collection of mostly specialty items. |
7712
